Free Delivery on Orders Over £30
Prices Shown Include 20% UK VAT
Call Us On +44(0)1234 841221

Three Phase Electric Vehicle Charging

ZAPPI-222TB 22KW 3 phase Tethered Black EV Charger Tethered Type 2 Modes ECO, ECO+ & FAST

(1)

ZAPPI-222TB 22KW 3 phase Tethered Black EV Charger Tethered Type 2 Modes ECO, ECO+ & FAST

(1)
£879.00 £732.50 (ex. VAT)
Stock Status: In Stock

ZAPPI-227TB - 22kW Tethered Black 3 phase input

Zappi has special eco charging modes which will benefit homeowners with grid-tied micro-generation systems, like wind or solar generation. Charging current is automatically and continually adjusted in response to on-site generation and household power consumption. In FAST charge mode, zappi operates like an ordinary EV charging station. 22kW 3-Phase

Key Product Features:

  • 3 charging modes (Fast, Eco and Eco+)
  • OLEV approved
  • Optimises micro generation self-consumption
  • Works with solar PV or wind turbine systems
  • Economy tariff sense input
  • Programmable timer function
  • Charge and event logging
  • Pin-code lock function
  • Tap operated display backlight
  • Built-in RCD protection
  • Integral cable holster
  • Remote control and monitoring add-on option
  • Supplied with clip-on grid current sensor

Technical Data:

  • Rated Power: 7kW (1-ph) or 22kW (3-ph)
  • Rated Supply: Voltage 400V AC 3-phase (+/- 10%)
  • Supply Frequency: 50 Hz
  • Rated Current: 32A max
  • Standby Power Consumption: 3W
  • Earth Leakage Protection: Integral 30mA Type A RCD (EN 61008) + 6mA DC protection (EN 62955)
  • Economy Tariff Sense Input: 230V AC sensing (4.0kV isolated)
  • Wireless Interface: 868 MHz (proprietary protocol) for wireless sensor and remote monitoring options
  • Grid Current Sensor: 100A max. primary current, 16mm max. cable diameter
  • Supply Cable Entry: Rear, bottom or side
  • Enclosure Dimensions: 439 x 282 x 122mm
  • Protection Degree: IP65 (weatherproof)
  • Enclosure Material: ABS 6 & 3mm (UL 94 flame retardant) colours: White RAL 9016 and grey RAL 9006
  • Operating Temperature: -25°C to +40°C
  • Circuit Breaker: 40A curve B (2-pole 1-ph)
  • Earthing Arrangement TN : Can be connected to the PME supply. Complies with BS 7671:2018, 722.411.4.1 (iii)
  • Earthing Arrangement TT : Earth resistance < 200 Ω according to BS 7671:2018, or < 100 Ω for some vehicles



PDF Data:
 




 

Installation PDF Data:
 




 

Based on 1 review(s)
Write an online review and share your thoughts with other shoppers!
Tony Stein - Stratford-upon-avon

Great EV charger, slight concern over the materials used in the plug end of the cable.

Looks smart, simplicity itself to use, if I had any concern at all it would be that the charger plug on the end of the cable looks to be quite hard/brittle and I suspect it would crack or break quite easily if dropped onto the floor. Also there’s no rubber cap for the charger plug though that’s probably because they expect it to be holstered in the unit or plugged into the car at all times.