Free Delivery on Orders Over £30
Prices Shown Include 20% UK VAT
Call Us On +44(0)1234 841221

Refrigerant Oil Polyester And Mineral

SUNISO 4GS Refrigeration Mineral Oil Lubricant For Use In HCFC and CFC Systems 25 Liters

SUNISO 4GS Refrigeration Mineral Oil Lubricant For Use In HCFC and CFC Systems 25 Liters

£346.89 £289.07 (ex. VAT)
Stock Status: In Stock


Suniso performance lubricants, specifically designed for use in refrigeration compressors and heat pumps. Highly stable, essentially wax free and providing excellent low temperature properties and assuring long trouble-free life. Suniso GS oils can be used in virtually any installation, regardless of compressor or evaporation temperature and are miscible with (H)CFC refrigerants and natural refrigerants. SUNISO GS Oils are miscible well with HCFC and CFC refrigerants such as R-22, R-502 and R-12 while featuring excellent stability and giving long trouble-free service life in the refrigeration systems using above refrigerants. In addition, SUNISO GS Oils also perform excellently with natural refrigerants such as R-717, R-600a and R-290. SUNISO GS Oils are refined from specially selected naphthenic crude oils by special method assuring excellent lubricity and other properties. SUNISO GS Oils are approved by all major air-conditioner, refrigerator, freezer, car air-conditioner manufacturers in the world.



Chemical Stability
To resist chemical reaction with the refrigerant or other material normally present in the system.

Thermal Stability
To eliminate excessive carbon deposits at compressor hot spots such as valves or discharge ports.

Low Wax Content
To prevent separation of flocculant wax from the oil-refrigerant mixture at the low temperature points in the system.

Low Pour Point
To prevent separated oil from congealing in refrigerant lines.

High Dielectric Strength
To insure good insulating properties. In hermetic units, the oil-refrigerant mixture serves as an insulator between the motor and the compressor body.

Proper Viscosity
Even when diluted with refrigerant so as to insure high film strength at elevated operating temperatures and while providing good fluidity under coldest operating conditions

No Contamination
To prevent scarring of bearing surfaces, plugging of lines or oil ports and general deterioration.

Refrigerants

CFC              R11, R12, R13, R131b1, R113, R114, R500, R502, R503
HCFC           R22, R123, R124, R401a, R402a, R402b, R403b, R406a,R408a, R409a
Ammonia    R717
Isobutane   R600a
Propane      R290



Data Sheet:


Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product