Free Delivery on Orders Over £30
Prices Shown Include 20% UK VAT
Call Us On +44(0)1234 841221

Pro-Audio Microphones

SE 2200A USB Microphone Including Suspension Mount

SE 2200A USB Microphone Including Suspension Mount

£275.73 £229.78 (ex. VAT)
Stock Status: Sold Out
Sorry, this item is out of stock

SE 2200A USB Microphone Including Suspension Mount 

Designed by a team of extremely experienced engineers and verified by extensive listening tests, each SE 2200A USB Microphone utilises gold sputtered, ultra-light mylar diaphragms in an advanced capsule design. The SE 2200A Microphone USB is constructed using the finest quality Japanese electronic components and extensively tested to provide you with years of trouble-free operation. Every SE 2200A USB Microphone comes with an individual frequency response plot. The SE 2200A USB tube microphone use traditional, high voltage tube circuitry to ensure the true vintage tube sound. This is in contrast to many cost saving tube designs where the tube is run at a very low operating voltage so as to introduce deliberate distortion which their designers hope to pass off as warmth. Whereas most vintage mic tubes are hard to find and extremely expensive, The SE 2200A USB Microphone uses commonly available high performance tubes that are specially selected and matched for low noise operation. 

There are two basic microphone directional patterns, omni-directional, which picks up sound equally from all directions, and figure-of-eight, which picks up from both the front and rear of the microphone but not from the sides. Combining these two basic patterns creates a cardioid or directional response, which simply means the SE 2200A USB Microphone is most sensitive in one particular direction. By varying the way in which the omni-directional and figure-of-eight patterns are combined, varying widths of cardioid pattern can be created. Finished in black rubberised material.

Key Product Features: 

  • Transformer-balanced microphone
  • Supplied with with metal shock mount cradle and aluminum flight case
  • High SPL capability at 130dB
  • Specifications:
  • Frequency Response: 20Hz-20KHz
  • Sensitivity: 14.1mV/Pa -37 +/- 1.5dB
  • Polar Pattern: Cardioid
  • Impedance: < 200 Ohms
  • Equivalent Noise Level: 12dB(A weighted)
  • Max SPL for 0.5% THD@1000Hz: 130dB
  • Power Requirement: Phantom power 48V +/- 4V
  • Connector: 3-pin XLR
  • USB 2.0 USB1.x compatible
  • Stereo D/A and A/D conversion
  • Zero latency Headphone monitoring
  • Gain Control built in
  • At THD > -90db, SNR 96db (D/A conversion)
  • At THD > -90db, SNR 92db (A/D conversion)
  • Adaptive 44.1 to 48KHz sampling frequency


  • Includes Suspension Mount
  • Supplied with with metal shock mount cradle and aluminum flight case
  • SE-2200A USB Microphone


Write an online review and share your thoughts with other shoppers!
Be the first to review this product