Panasonic Air Conditioning's outstanding energy saving performance with Inverter technology and a high-performance compressor provides top-class operating efficiency (A+). This lets you enjoy lower electricity bills while contributing to environmental protection. After reaching the set temperature quickly, the power will be adjusted smoothly to keep the temperature constant. So, there will be no sharp temperature changes and you will save power. The ample range of output powers also guarantees a pleasant temperature at all times, even when the number of people in the room fluctuates. This way, Inverter air conditioners provide more precise temperature control than non-Inverter models.
Panasonic Air Conditioning have succeeded in making one of the most silent air conditioners on the market. Panasonic air conditioner’s indoor operating noise has been reduced by 3dB as the Inverter constantly varies its output power to enable more precise temperature control. In comparison, a non-Inverter air conditioner controls the temperature by switching on and off. The indoor unit noise rating is 22Db
The NEW sleek design standard inverter wall mounted indoor units have a new ‘smooth line’ design which has a lower profile of 214mm, and is far more easy to keep clean. This model has a timeless, attractive look which integrates elegantly into any room with it's gently defined curved shape. Using a energy saving performance by rotary compressor and ozone friendly R32 refrigerant combined quiet airflow settings using the harmonised temperature as well as the jet-flow low noise air movement fan arrangement. The result is a quiet, high performance cooling and heating system, with advanced electronic controls for maximum comfort, controllable and energy efficient.
The new slim profile indoor unit has a reduced height of 290mm, allowing installation above door openings and windows. The new multiple stage heat exchanger is folded to form a surround to the upper section of the fan enclosure. This ensures low air velocity, and reduced sound levels, whilst delivering high performance and efficiency.
Product Key Feature's:
• High CoP, up to 3.8 A+
• New advanced technology control
• Infra-red controller with wall mounting bracket
• Reduced height slim construction
• Pipe runs up to 15 metres
• Low noise – 22dBA on smaller models
• Back-up switch for loss of controller
• Cold draft prevention on heat pump start up
• Fault diagnosis
• Auto re-start after power interruption
• PRE-CHARGED WITH REFRIGERANT for up to 10 metres pipe length
• Low power requirements 13A fuse.
• Horizontal and vertical vane swoop
Technical Specification:
Kit |
KIT-RE24-QKE |
Indoor |
CS-RE24QKE |
Outdoor |
CU-RE24QKE |
Cooling capacity |
Nominal (Min - Max) |
kW |
6.80 (0.98 - 8.10) |
Nominal (Min - Max) |
kCal/h |
5,850 (840 - 6,970) |
SEER |
Nominal |
Energy Saving |
6.00 h |
Pdesign (cooling) |
kW |
6.8 |
Power input cooling |
Nominal (Min - Max) |
kW |
2.100 (0.380 - 2.670) |
Annual electricity consumption (cooling) 1) |
kWh/a |
397 |
Heating capacity |
Nominal (Min - Max) |
kW |
8.60 (0.98 - 9.90) |
Nominal (Min - Max) |
kCal/h |
7,400 (840 - 8,510) |
Heating capacity at -7°C |
Nominal |
kW |
6.13 |
SCOP |
Nominal |
Energy Saving |
3.80 a |
Pdesign at -10°C |
kW |
5.5 |
Power input heating |
Nominal (Min - Max) |
kW |
2.610 (0.450 - 3.130) |
Annual electricity consumption (heating) 1) |
kWh/a |
2,026 |
Indoor Unit |
Power source |
V |
230 |
Recommended fuse |
A |
16 |
Recommended power cable section |
mm² |
2.5 |
Connection (indoor/outdoor) |
mm² |
4 x 1.5 |
Current (Nominal) |
Cooling / Heating |
A |
9.60 / 11.70 |
Maximum current |
A |
14.5 |
Air volume |
Cooling / Heating |
m³/h |
1,104 / 1,170 |
Moisture removal volume |
l/h |
3.9 |
Sound pressure level 2) |
Cooling (Hi / Lo / Q-Lo) |
dB(A) |
47 / 38 / - |
Heating (Hi / Lo / Q-Lo) |
dB(A) |
47 / 38 / - |
Sound power level |
Cooling (Hi) |
dB |
63 |
Heating (Hi) |
dB |
63 |
Dimensions |
H x W x D |
mm |
290 x 1,070 x 240 |
Net weight |
kg |
12 |
Air purifier filter |
Anti Bacterial Filter |
Silver decoration sheet |
Yes |
Outdoor Unit |
Air volume |
Cooling / Heating |
m³/h |
3,012 / 3,012 |
Sound pressure level 2) |
Cooling (Hi) |
dB(A) |
52 |
Heating (Hi) |
dB(A) |
52 |
Sound power level |
Cooling (Hi) |
dB |
66 |
Heating (Hi) |
dB |
66 |
Dimensions 3) |
H x W x D |
mm |
795 x 875 x 320 |
Net weight |
kg |
67 |
Piping connections |
Liquid / Gas pipe |
inch (mm) |
1/4 (6.35) / 5/8 (15.88) |
Refrigerant loading |
R410A |
kg |
1.8 |
Elevation difference (in/out) |
Max |
m |
20 |
Piping length |
Min / Max |
m |
Mar-30 |
Precharge length |
Max |
m |
10 |
Additional charge |
g/m |
30 |
Operating range |
Cooling Min / Max |
°C |
-0.23255814 |
Heating Min / Max |
°C |
-0.625 |
PDF Data:

These air conditioning units must be installed by an F-Gas qualified engineer. We can install the unit for you using our F-Gas Certified Engineers. Please note if you do not select our installation service we will not ship the unit until we have obtained evidence from you that you will have the unit installed by an F-Gas qualified engineer. This is a requirement of the Article 11 (5) EC/517/2014 on fluorinated greenhouse gases and The Fluorinated Greenhouse Gases Regulations 2015.