Gateway for integration of Mitsubishi Heavy Industries air conditioning systems into Modbus (RTU and TCP) systems. 

This gateway allows integrating a Mitsubishi Heavy Industries AC system inside a supervision/control/automation system through PLC, SCADA and, in general, through any device or system with Modbus mastering (TCP or RTU) interface. The aim of this integration is to make accessible several Mitsubishi Heavy Industries air conditioning indoor units communicating with the Superlink protocol as if they were part of a Modbus system. Therefore, the IntesisBox® Modbus Server acts as a Modbus slave in the Modbus interface, allowing the Modbus master read and write in the Modbus registers. Two Modbus mode connection types can be active in IntesisBox®: Modbus RTU or Modbus TCP, or both simultaneously. IntesisBox® includes all hardware needed to connect directly with the Mitsubishi Heavy Industries indoor units connecting with Superlink network. IntesisBox Modbus Server series are configured using LinkBoxMB, a software tool for WindowsTM supplied along with the purchase of IntesisBox® with no additional cost. With the standard installation of LinkBoxMB, a Demo project for integration of several MHI indoor units is also installed. Using this demo project makes the engineering needed for this integration easy and quick, almost plug&play.