This Kit Includes:
|
RC-HY40
|
MHI RC-HY40 Controller
|
1
|
|
FDCW-NX-A
|
MHI FDCW-NX-A Hydrolution A2W Outdoor Unit
|
1
|
|
HSB-
|
MHI HSB HYDRO Unit Assy Split Box Indoor Unit
|
1
|
|
PT-200-500
|
MHI PT200-500 A2W Tank
|
1
|
|
CPD11-25M/75
|
MHI CPD11-25M/75 A2W Pump
|
1
|
|
ELK6/9M
|
MHI ELK6/9M A2W HEATER 6/9kW
|
1
|
|
VST20M
|
MHI VST20M A2W REV VALVE
|
1
|
Mitsubishi Heavy Industries Air to Water Heat Pump is a complete modern system for heating, cooling and producing hot sanitary water for small houses, offering effective energy saving and reducing carbon dioxide emission. Safe and economical with integrated hot water heater, immersion heater, circulating pump and climate system within the indoor unit.
The heat energy is retrieved from the outdoor air through an outdoor unit (FDCW100VNX), and is transferred to the indoor unit (HM270V) by the medium of refrigerant circulated in closed piping system. This eliminates the needs of bore holes and coils in the ground for conventional systems.
Optimum annual operation costs thanks to the inverter driven compressor. The speed of the compressor is controlled according to the demand, and the industry’s highest COP level of 3.70 in heating operation has been achieved.
The compact size (600x650mm footprint) has been achieved by integrating the hot water tank for sanitary water together with the water heat exchanger in the indoor unit. Electric wiring and piping works are simpler due to integrated indoor unit design.
Max temperature flow line is 65°C with use of a large-capacity auxiliary electric heater as standard equipment for back-up, so that the system will be able to cope with irregular and excessive use of hot water. (58°C with only use of compressor). Various sterilization temperature settings are available according to the requirements of each country.
Key Product Feature's:
- COP Heating - 3.75+ A+
- 240Volt 1 phase (also available in 3phase)
- Refrigerant R417A / R410A
- Option of solar collector connection
- Rated to -20DegC Heating
- Dimensions: L1760, W600, D650
- Heating and cooling
- Weight 214Kg ( indoor and outdoor)
PDF Data Sheet:
These units must be installed by an F-Gas qualified engineer. We can install the unit for you using our F-Gas Certified Engineers. Please note if you do not select our installation service we will not ship the unit until we have obtained evidence from you that you will have the unit installed by an F-Gas qualified engineer. This is a requirement of the Article 11 (5) EC/517/2014 on fluorinated greenhouse gases and The Fluorinated Greenhouse Gases Regulations 2015.
