Free Delivery on Orders Over £30
Prices Shown Include 20% UK VAT
Call Us On +44(0)1234 841221

Mitsubishi Heavy Industries SRK-ZSP Wall Air Conditioning Standard Inverter Heat Pump A++

Mitsubishi Heavy Industries Air Conditioning SRK25ZSP-W Wall Heat pump 2.5Kw/9000Btu A R32 240V~50Hz

Mitsubishi Heavy Industries Air Conditioning SRK25ZSP-W Wall Heat pump 2.5Kw/9000Btu A R32 240V~50Hz

£549.25 £457.71 (ex. VAT)
Stock Status: In Stock

1 x Mitsubishi Heavy Industries Air Conditioning SRK25ZSP-W Wall Heat pump 2.5Kw/9000Btu Indoor Unit
1 x Mitsubishi Heavy Industries Air Conditioning SRC25ZSP-W Heat pump 2.5Kw/9000Btu Outdoor Unit
1 x Mitsubishi Heavy Industries Air Conditioning Ir Remote Control
Now Available (R32:The next generation refrigerant) 

R32 is the next generation refrigerant that boasts nearly 70% lower Global Warming Potential Rate than R410A. Due to its superior qualities R32 offers amazing energy efficiency benefits. It has a potential refrigerating effect 1.5 times that of R410A meaning it needs less energy to achieve the desired temperature and requires less refrigerant volume to operate


High Seasonal Efficiency A+ Rated

MITSUBISHI HEAVY INDUSTRIES has made a giant leap forward in air conditioning and heat pump technology, with the latest introduction of high performance standard range "ZSP" wall mounted air conditioning systems. The NEW ADVANCED SRK Wall Mounted Indoor Units have a new ‘smooth line’ design of fascia, which has a lower profile flatter appearance, and is far more easy to keep clean. The SRK now includes the Mitsubishi innovative NATURAL ENZYME FILTER which destroys funghi, bacteria and viruses. This, combined with the main Photocatalytic Washable Deodorizing Filter, provides healthy clean air for the occupants.

MITSUBISHI has used its innovative technology of compressor design, and the ozone friendly R32 refrigerant, and combined this with their new “jet-flow” low noise air movement fan arrangement. The result is a quiet, high performance cooling and heating system, with advanced electronic controls for maximum comfort, controllable and energy efficient.


ZSP Series
The new slim profile indoor unit has a reduced height of 275mm, allowing installation above door openings and windows. The new multiple stage heat exchanger is folded to form a surround to the upper section of the fan enclosure. This ensures low air velocity, and reduced sound levels, whilst delivering high performance and efficiency.


Product Key Feature's:

• High CoP, up to 3.82
• New advanced technology control
• Infra-red controller with wall mounting
• Reduced height slim construction
• Pipe runs up to 15 metres
• Low noise – 23dBA on smaller models
• Back-up switch for loss of controller
• Cold draft prevention on heat pump
start up
• Fault diagnosis
• Auto re-start after power interruption
up to 10 metres pipe length

 Low power requirements 13A fuse.
• Horizontal and vertical vane swoop


Technical Specification:

Indoor unit   SRK25ZSP-W
Outdoor unit   SRC25ZSP-W
Power source   1 Phase, 220 - 240V, 50Hz
Nominal cooling capacity (Min~Max) kW 2.5(0.9~2.8)
Nominal heating capacity (Min~Max) kW 2.8(0.8~3.9)
Power consumption Cooling/Heating kW 0.78 / 0.755
EER/COP Cooling/Heating   3.21/3.71
Inrush current 220/230/240 V A 3.9 / 3.8 / 3.6
Max. running current   9
*Sound power level Indoor Cooling/Heating  
58/ 57
Outdoor Cooling/Heating 58 / 59
*Sound pressure level  
Cooling (Hi/Me/Lo) 43/ 34 / 23
Heating (Hi/Me/Lo) 43 / 34 / 26
Outdoor Cooling/Heating 47 / 45
Air flow
Cooling (Hi/Me/Lo)  
10.1 / 7.3 / 4.2
Heating (Hi/Me/Lo) 9.5 / 7.3 / 5.2
Outdoor Cooling/Heating 26.0 / 19.7
Exterior dimensions Indoor HeightxWidthxDepth mm 267 x 783 x 210
Outdoor 540 x 645(+57) x 275
Net weight Indoor / Outdoor kg 7 / 25
Ref.piping size Liquid/Gas ø mm 6.35(1/4") / 9.52(3/8")
Refrigerant line (one way) length m Max. 15
Vertical height differences Outdoor is higher/lower m Max. 10 / Max. 10
Outdoor operating temperature range Cooling ˚C -15~46
Heating -15~21
Clean filter   -

PDF Data:

These air conditioning units must be installed by an F-Gas qualified engineer.  We can install the unit for you using our F-Gas Certified Engineers. Please note if you do not select our installation service  we will not ship the unit until we have obtained evidence from you that you will have the unit installed by an F-Gas qualified engineer. This is a requirement of the Article 11 (5) EC/517/2014 on fluorinated greenhouse gases and The Fluorinated Greenhouse Gases Regulations 2015.
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product