Includes:
1 x Mitsubishi Heavy Industries Air Conditioning SCM80ZS-S Multi Outdoor Heat Pump 2-4 Port R32 A++ 8Kw
4 x Mitsubishi Heavy Industries Air Conditioning SRK35ZSP-W Wall Heat pump 3.5Kw/12000Btu R32 Indoor Unit Only
4 x Mitsubishi Heavy Industries Air Conditioning Infrared Remote Control
Efficiency Elevated: A+ Seasonal Rating
Mitsubishi Heavy Industries Air Conditioning revolutionizes the air conditioning and heat pump domain with their ground breaking "standard inverter" ZSP wall-mounted system. Experience the sleek aesthetics of the standard white wall mounted units with their streamlined indoor unit design that’s not just appealing but also simpler to maintain for filter cleaning.
Prioritizing health, MITSUBISHI integrates the pioneering NATURAL ENZYME FILTER, adept at neutralizing fungi, bacteria, and viruses. This, when paired with the principal Photocatalytic Washable Deodorizing Filter, guarantees a breath of fresh, sanitized air for users.
Harnessing the power of inventive inverter compressor technology and eco-friendly R32 refrigerant, Mitsubishi Heavy Industries also introduces the “jet-flow” fan technology. This ensures minimal noise and powerful, wide spread air circulation. The result? A superior cooling and heating system replete with cutting-edge electronic controls, striking a balance between unparalleled comfort and energy efficiency.
Design meets functionality. The slimmed-down profile of the indoor unit, now only 275mm in height, provides versatility, allowing installations above doors and windows. The ingeniously designed multi-stage heat exchanger wraps around the top section of the fan casing. This ensures a muted airflow and noise reduction, all while delivering peak performance and efficiency.
Product Key Feature's:
• High CoP, up to 3.82
• New advanced technology control
• Infra-red controller with wall mounting bracket
• Reduced height slim construction
• Low noise – 23dBA on smaller models
• Back-up switch for loss of controller
• Cold draft prevention on heat pump start up
• Fault diagnosis
• Auto re-start after power interruption
Technical Specification:
|
INDOOR UNIT c/w Controller
|
|
SKM35ZSP-W
|
|
Nominal Cooling
|
Kw
|
3.5
|
|
Nominal Heating
|
Kw
|
4.5
|
|
Exterior Dimensions (H x W x D)
|
mm
|
267 x 783 x 212
|
|
Net Weight
|
kg
|
7.5
|
|
Air Flow (H/M/L) Cooling
|
m3/m
|
9.0 / 7.5 / 5.0
|
|
Air Flow (H/M/L) Heating
|
m3/m
|
8.5 / 7.0 / 6.0
|
|
Sound Pressure Level (H/M/L) Cooling
|
db(A)
|
44 / 37 / 25
|
|
Sound Pressure Level (H/M/L) Heating
|
db(A)
|
8.5 / 7.0 / 6.0
|
|
Ref. Piping Size o.d.ins (mm)
|
Liquid
|
1/4 (6.35)
|
|
Suction
|
3/8 (9.52
|
|
Outdoor
|
SCM80ZS-W
|
|
Power source (Outdoor)
|
1 Phase 240V 50Hz
|
|
*Operation data
|
Nominal Capacity (Range)
|
Cooling T1
|
kW
|
8.0 (1.8~9.2)
|
|
Heating H1
|
9.3 (1.1~9.8)
|
|
Power consumption
|
Cooling T1
|
1.70
|
|
Heating H1
|
1.95
|
|
Running current
|
Cooling T1
|
A
|
7.2
|
|
Heating H1
|
8.2
|
|
Inrush current, maximum current
|
5, 20
|
|
EER
|
Cooling T1
|
|
4.71
|
|
COP
|
Heating H1
|
4.77
|
|
Sound power level (JIS C9612)
|
Cooling T1
|
dB(A)
|
66
|
|
Heating H1
|
67
|
|
Sound pressure level (JIS C9612)
|
Cooling T1
|
54
|
|
Heating H1
|
54
|
|
Silent mode
|
Cooling T1
|
46
|
|
Heating H1
|
50
|
|
External dimensions (HxWxD)
|
mm
|
750x880(+73)x340
|
|
Net weight
|
kg
|
61
|
|
Refrigerant (R32)
|
Quantity
|
2.55
|
|
Pre charged to pipe length
|
m
|
30
|
|
Installation data
|
Refrigerant piping
|
Liquid line
|
mm
|
Ø6.35 x 4
|
|
Gas line
|
Ø9.52 x 4
|
|
Connection method
|
|
Flare connection
|
|
Maximum pipe length to one indoor unit
|
m
|
25
|
|
Total pipe length to all indoor units
|
70
|
|
Max vertical height diff. between O.U. and I.U.
|
20 ( O.U. above I.U.) / 20 ( O.U. below I.U. )
|
|
Indoor Unit Connection
|
2 to 4 Units
|
|
Indoor Connection Capacity
|
kW
|
8.0 to 13.5
|
|
Outdoor air temperature (upper, lower limits)
|
Cooling
|
°C
|
-15 to 46
|
|
Heating
|
-15 to 24
|
|
* Operation data are are conducted in accordance with AS/NZS 3823 standard. For testing conditions please refer to Page14.
|
|
** This model normally requires a minimum of 3 indoor units. Combination of 2 indoor units in some circumstances would be permitted. Please refer to the “Combination Limitations” table on page 10 for the detailed connection information.
|
PDF Data:
These air conditioning units must be installed by an F-Gas qualified engineer. We can install the unit for you using our F-Gas Certified Engineers. Please note if you do not select our installation service we will not ship the unit until we have obtained evidence from you that you will have the unit installed by an F-Gas qualified engineer. This is a requirement of the Article 11 (5) EC/517/2014 on fluorinated greenhouse gases and The Fluorinated Greenhouse Gases Regulations 2015.
