Mitsubishi Heavy Industries Air Conditioning FDUM100VF1 Ducted 10Kw/33000Btu Heat Pump Inverter A 240V/415V~50Hz
MODEL REPLACED BY R32 FDUM100VH
Ducted Heat Pumps for Commercial & Residential Applications. Ideal for concealed cooling, multiple area applications or irregular shaped rooms. FDUM Ducted units are of robust construction, and are fitted with large diameter fans for optimum air volume, whilst maintaining low sound levels. Condensate Pump included. Return plenums with filters available as a option for easy installation. Plenum outlets and inlets 200mm.
Superior Controls Specification
There has never been a multi function controller with the advanced sophistication of the new Mitsubishi R CE1. It combines all the basic user requirements - temperature setting, fan speed selection, mode, and timer settings, with a comprehensive range of service data functions, inverter compressor speed indication, fault diagnosis, and operational history.
FDUM Technical Specification
7-Day Programmable Timer
• Two on/off settings each day
• Different temperature for each set
period
• External timer/8MS switching for Group (up
to 16 units)
• Wall Controller - hard wired
• Integral temperature sensor
• Condensate Lift Pump included
• Low ambient control included
• Auto re-start after power interruption
• Compatible with Multi Systems
Mitsubishi Heavy Industrial - FDUM100 Ducted
Power source 1 ph
Type Inverter
COOLING (nominal) max. kW 6.1 to 11.2
HEATING (nominal) max. kW 6.0 to 12.5
UK Cooling (max) kW 8.0
UK Sensible Cooling kW n/a
E.E.R. n/a
Energy label in heating A+
Energy label in cooling A+
S.C.O.P 4.2
INDOOR UNIT FDUM100VF1
Exterior dimensions (mm) 280 x 1370 x 740
Net weight kg 34
Sound Pressure Level* (cooling) dB(A) 34 high speed
Sound Pressure Level* (heating) dB(A) 31 high speed
OUTDOOR UNIT FDC100VN
Exterior dimensions (mm) 845 x 970 x 370
Net weight kg 75
Power Source Rating MCB A 15A
Refrigerant R410a
max piping length m 50
Pipe sizes 3/8" and 5/8"
PDF Data:
These air conditioning units must be installed by an F-Gas qualified engineer. We can install the unit for you using our F-Gas Certified Engineers. Please note if you do not select our installation service we will not ship the unit until we have obtained evidence from you that you will have the unit installed by an F-Gas qualified engineer. This is a requirement of the Article 11 (5) EC/517/2014 on fluorinated greenhouse gases and The Fluorinated Greenhouse Gases Regulations 2015.