Mitsubishi Heavy Industries Air Conditioning Standard Inverter FDT100VH + FDC100VNP-W Cassette Heat Pump 10Kw/34000Btu A+ R32 1Ph 220-240V~50Hz
This Kit Includes:
1 of Mitsubishi Heavy Industries Air Conditioning FDT100VH Cassette R32 10Kw
1 of Mitsubishi Heavy Industries Air Conditioning Outdoor Unit Standard Inverter R32 10Kw R32 FDC100VNP-W A+ R32 220-240V~50Hz
1 of Mitsubishi Heavy Industries Air Conditioning Eco Touch RC-EX1A Wired Remote Controller 2 wire PAC
1 of PANEL PART NUMBER T-PSA-5BW-E

Cassette Heat Pumps for Commercial And Residential Applications. Ideal for large open plan areas, or irregular shaped rooms. High efficiency with low noise levels.
Mitsubishi Heavy Industries air conditioning has made a giant leap forward in air conditioning and heat pump technology with the development of the high performance standard cassette range. The Mitsubishi Heavy Industries air conditioning split cassette units are ideal for commercial application such as offices, shops, meeting rooms, restaurants, hotels, clubs, gyms, and open plan areas. The Advanced FDT Cassette range has now been extended to include new small capacity inverter heat pump systems starting at 4Kw, and an extra high capacity system 14Kw at the top end. The 7-Day Programmable Timer now included in standard controls specification.
The improved air flow pattern through the unit and the new design high performance heat exchanger have resulted in a pressure loss reduction, allowing the fan design to be optimised for significantly lower sound levels. The air discharge louver has been modified to minimise air smudging on the ceiling adjacent to the air outlets.
Product Key Feature's:
• 7-Day 24 HR Programmable Timer
• Two on/off settings each day
• Different temperature for each set period
• External timer/BMS switching for Group (up to 16 units)
• Wall Controller - hard wired
• Integral temperature sensor
• Slim 298mm Construction
• Infra-red wireless controller optional
• INVERTER technology
• Low profile attractive grey/white fascia panel
• Improved anti-smudge air discharge
• Low ambient control included
• Auto re-start after power interruption
• Reduced sound levels
• Long pipe-runs up to 30 Meters
• High C.O.P
• Integrated condensate pump
Technical Data:
INDOOR UNIT
PART NUMBER |
|
FDT100VH
628470 |
PANEL
PART NUMBER |
|
T-PSA-5BW-E
623220 |
HARD WIRED CONTROLLER
PART NUMBER |
|
RC-EX3A
629204 |
OUTDOOR UNIT
PART NUMBER |
|
FDC100VNP-W
627105 |
UK Cooling |
kW |
9.42 |
UK Sensible Cooling |
kW |
7.76 |
Cooling Range (Nominal) |
kW |
2.1 to 10.2 |
S.E.E.R, EER, Energy Label |
|
7.08, 3.52, A++ |
Heating Range (Nominal) |
kW |
1.7 to 10.4 |
S.C.O.P, COP, Energy Label |
|
4.43, 4.29, A+ |
INDOOR UNIT |
INDOO |
Exterior Dimensions (H x W x D) |
mm |
298 x 840 x 840 |
Net Weight (Includes Panel) |
kg |
30 |
Air Flow (H/M/L) Cooling |
m3/m |
26 / 23 / 17 |
Air Flow (H/M/L) Heating |
m3/m |
26 / 23 / 17 |
Sound Pressure Level (H/M/L) Cooling |
db(A) |
39 / 36 / 30 |
Sound Pressure Level (H/M/L) Heating |
db(A) |
39 / 36 / 29 |
OUTDOOR UNIT |
OUTDOOR |
Exterior Dimensions (H x W x D) |
mm |
750 x 880(+88) x 340 |
Net Weight |
kg |
57 |
Sound Pressure Level Cooling/Heating |
db(A) |
56 / 54 |
ELECTRICAL DATA |
ELECTRI |
Power Source Rating MCB |
A |
20 |
Mains Power To |
Outdoor |
1 Phase 220-240V, 50Hz |
Interconnecting Wires (Dia) |
(mm2) |
3+E (1.5) |
Start Current / Max Running Current |
A |
5 / 19 |
INSTALLATION/REFRIGERANT |
INSTALLATION |
Ref. Piping Size o.d.ins (mm) |
Liquid |
1/4 * |
Suction |
5/8 |
Ref. Min Piping Length |
m |
- |
Ref. Max Piping Length |
m |
30 |
Vertical Height Difference (Max)
*Outdoor Unit Above/Below Indoor Unit |
m |
Max.20 / Max.20 |
Refrigerant Amount Pre-charged (kg/TCO2Eq) |
1.7/1.148 |
* For Pipe Length Up To |
m |
15 |
Additional Refrigerant |
g/m |
20 |
PDF Data Sheet:

These air conditioning units must be installed by an F-Gas qualified engineer. We can install the unit for you using our F-Gas Certified Engineers. Please note if you do not select our installation service we will not ship the unit until we have obtained evidence from you that you will have the unit installed by an F-Gas qualified engineer. This is a requirement of the Article 11 (5) EC/517/2014 on fluorinated greenhouse gases and The Fluorinated Greenhouse Gases Regulations 2015.