Ceiling Suspended indoor unit - now has stylish rounded side panels, and a slimmer profile - only 210mm on smaller models. The FDEN is suitable for areas which do not have suspended ceilings, and can be installed adjacent to a side wall, allowing the pipe connections and electrical wiring are concealed.
Mitsubishi Heavy Industries has made a giant leap forward in air conditioning and heat pump technology, with the development of high performance FDEN Series split systems for commercial application: offices, shops, meeting rooms, restaurants, hotels, clubs, gyms, and open plan areas. The new design FDEN Ceiling Systems have now been extended to include new small capacity INVERTER systems starting at 1.8kW/2.0kW, and large capacity cooling/heating at the top end 14.2kW/15.9kW. The heat exchange has again been improved, using slit-fins and inner grooved tubing for maximum efficency in heating and cooling, whilst maintaining lower sound levels.
7-Day Programmable Timer - now included in standard controls specification. The CoP (Coefficient of Performance) has been dramatically increased, up to 3.67 on some models. This means the system can deliver 3.67kW of heating, whilst consuming only 1.0kW of electrical power. This has been achieved by combining advanced Mitsubishi technology with R410A.
Product Key Feature's:
• 7-Day 24 HR Programmable Timer
• Two on/off settings each day
• Different temperature for each set period
• External timer/BMS switching for Group (up to 16 units)
• Wall Controller - hard wired
• Integral temperature sensor
• Slim 270mm Construction
• Infra-red wireless controller optional
• INVERTER technology
• Low profile attractive grey/white fascia panel
• Improved anti-smudge air discharge
• Low ambient control included
• Auto re-start after power interruption
• Reduced sound levels
• Long pipe-runs upto 40 Meters
• High C.O.P
• Available in 240V and 415V~50Hz
Mitsubishi Heavy Industrial - FDEN140V Floor / Ceiling Unit
Power source 1 ph
COOLING (nominal) max. kW 7.0 to 14.5
HEATING (nominal) max. kW 6.3 to 16.5
UK Cooling (max) kW n/a
UK Sensible Cooling kW n/a
Energy label in heating B
Energy label in cooling B
Exterior dimensions (mm) 250x1620x690
Net weight kg 46
Sound Pressure Level* (cooling) dB(A) 56 high speed
Sound Pressure Level* (heating) dB(A) 56 high speed
Pipe sizes 3/8" x 5/8"
OUTDOOR UNIT FDC140VN
Exterior dimensions (mm) 1300 x 970 x 370
Net weight kg 126
Power Source Rating MCB A 20A 1 PHASE 240V
Refrigerant max piping length m 50
Pipe sizes 3/8" x 5/8"