Mitsubishi Heavy Industries Air Conditioning FDC125VSA-W FDE125VH Under Ceiling 12.5Kw/42000Btu R32 A+ 3 Phase, 380 - 415V 50Hz
This Kit Includes:
1 x Mitsubishi Heavy Industries Air Conditioning FDE125VH Under Ceiling 12.5Kw R32
1 x Mitsubishi Heavy Industries Air Conditioning FDC125VSA-W Outdoor Inverter Micro Inverter Heat Pump Unit 12.5Kw R32 A+ 3 Phase, 380 - 415V 50Hz
1 x Mitsubishi Heavy Industries Air Conditioning Eco Touch RC-EX3A Wired Remote Controller 2 wire
The new Mitsubishi Heavy Industries Air Conditioning FDE R32 ceiling suspended indoor series now comes with stylish rounded side panels and a slimmer profile. The Mitsubishi Heavy Industries FDE is suitable for areas which do not have suspended ceilings, and can be installed adjacent to a side wall, allowing the pipe connections and electrical wiring are concealed. This system comes with the RC-EX3A Eco-touch is a touch screen wired controller providing full function control and more than 90 function settings.Using the wired remote control system, users can run and stop the unit, switch operations, adjust the temperature, fan speed and air flow direction (up or down), and control timer operation.
Mitsubishi Heavy Industries Air Conditioning has made a giant leap forward in air conditioning and heat pump technology, with the development of high performance R32 charged FDE series split systems ideally suited for commercial application such as offices, shops, meeting rooms, restaurants, hotels, clubs, gyms, and open plan areas. The heat exchangers have again been improved, now using slit-fins and inner grooved tubing for maximum efficiency in heating and cooling, whilst maintaining lower sound levels. The 7-Day Programmable timer is now included in the standard controls specification.
Product Key Feature's:
• 7-Day 24 HR Programmable Timer
• Two on/off settings each day
• Different temperature for each set period
• External timer/BMS switching for Group control
• Wall Controller - hard wired
• Integral temperature sensor
• Slim Construction
• Infra-red wireless controller optional
• INVERTER technology
• Low profile attractive grey/white fascia panel
• Improved anti-smudge air discharge
• Low ambient control included
• Auto re-start after power interruption
• Reduced sound levels
• Long pipe-runs
• High C.O.P
Technical Data:
| INDOOR UNIT |
|
FDE125VH |
| HARD WIRED CONTROLLER |
|
RC-EX3A |
| OUTDOOR UNIT |
|
FDC125VSA-W |
| UK Cooling |
kW |
11.58 |
| UK Sensible Cooling |
kW |
8.82 |
| Cooling Range (Nominal) |
kW |
5.0 to 14.0 |
| S.E.E.R, EER, Energy Label |
|
6.3, 2.81, N/A |
| Heating Range (Nominal) |
kW |
4.0 to 16.00 |
| S.C.O.P, COP, Energy Label |
|
4.30, 3.74, N/A |
| INDOOR UNIT |
| Exterior Dimensions (H x W x D) |
mm |
250 x 1,620 x 690 |
| Net Weight |
kg |
43 |
| Air Flow (H/M/L) Cooling |
m3/m |
29 / 23 / 17 |
| Air Flow (H/M/L) Heating |
m3/m |
29 / 23 / 17 |
| Sound Pressure Level (H/M/L) Cooling |
db(A) |
45 / 40 / 35 |
| Sound Pressure Level (H/M/L) Heating |
db(A) |
45 / 40 / 35 |
| OUTDOOR UNIT |
| Exterior Dimensions (H x W x D) |
mm |
845 x 970 x 370 |
| Net Weight |
kg |
78 |
| Sound Pressure Level Cooling/Heating |
db(A) |
54 / 65 |
| ELECTRICAL DATA |
| Power Source Rating MCB |
A |
20A per a phase |
| Mains Power To |
Outdoor |
3 Phase, 380 - 415V
50Hz |
| Interconnecting Wires (Dia) |
(mm2) |
3+E (1.5) |
| Start Current / Max Running Current |
A |
5 / 15 |
| INSTALLATION/REFRIGERANT |
| Ref. Piping Size o.d.ins (mm) |
Liquid |
3/8 |
| Suction |
5/8 |
| Ref. Min Piping Length |
m |
- |
| Ref. Max Piping Length |
m |
50 |
Vertical Height Difference (Max)
*Outdoor Unit Above/Below Indoor Unit |
m |
50 / 15 |
| Refrigerant Amount Pre-charged (kg/TCO2Eq) |
3.3 / 2.228 |
| * For Pipe Length Up To |
m |
30 |
| Additional Refrigerant |
g/m |
54 |
| PRODUCT NO. |
PRODUCT DESCRIPTION |
| RCN-E-E3 |
IR Remote Control & Receiver Kit for FDE**VG/F |
| LB-E |
Motion Sensor (USE 629204 RCEX3A Controller) |
| RCE5 |
Wired Controller |
| RCEX3A |
Eco Touch Controller |
| RCH-E3 |
Simplified Controller |
| PCZ006A043 |
6 Wire Adaptor |
| INMBSM- HI001R000 |
Modbus Interface 1 Indoor Unit |
| INKNXM- HI001R000 |
KNX Interface 1 Indoor Unit |
| SC-ADNA-E |
Superlink Adaptor |
| IHWFIM- HI001R000 |
Intensis Home WIFI Interface MHI Hard Wired |
| AZA16WSCMHI |
Airzone Aido WiFi |
| SC-THB-E3 |
Remote Sensor 8m |
| SSA42A024 |
Elbow for condensing drain kit (1 required) |
| SSA947089 |
Grommet for condensing drain kit (4 required) |
PDF Data Sheet:
These air conditioning units must be installed by an F-Gas qualified engineer. We can install the unit for you using our F-Gas Certified Engineers. Please note if you do not select our installation service we will not ship the unit until we have obtained evidence from you that you will have the unit installed by an F-Gas qualified engineer. This is a requirement of the Article 11 (5) EC/517/2014 on fluorinated greenhouse gases and The Fluorinated Greenhouse Gases Regulations 2015.
