Includes:
1 x Mitsubishi Heavy Industries Air Conditioning SRK45ZSP-W Wall Heat pump 4.5Kw/14000Btu Indoor Unit
1 x Mitsubishi Heavy Industries Air Conditioning SRC45ZSP-W Heat pump 4.5Kw/14000Btu Outdoor Unit 220-240V~50Hz
1 x Mitsubishi Heavy Industries Air Conditioning Infrared Remote Control
R32 is the next generation refrigerant that boasts nearly 70% lower Global Warming Potential Rate than R410A refrigerant. Due to its superior qualities R32 offers amazing energy efficiency benefits.
Efficiency Elevated: A+ Seasonal Rating
Mitsubishi Heavy Industries Air Conditioning revolutionizes the air conditioning and heat pump domain with their ground breaking "standard inverter" ZSP wall-mounted system. Experience the sleek aesthetics of the standard white wall mounted units with their streamlined indoor unit design that’s not just appealing but also simpler to maintain for filter cleaning.
Prioritizing health, MITSUBISHI integrates the pioneering NATURAL ENZYME FILTER, adept at neutralizing fungi, bacteria, and viruses. This, when paired with the principal Photocatalytic Washable Deodorizing Filter, guarantees a breath of fresh, sanitized air for users.
Harnessing the power of inventive inverter compressor technology and eco-friendly R32 refrigerant, Mitsubishi Heavy Industries also introduces the “jet-flow” fan technology. This ensures minimal noise and powerful, wide spread air circulation. The result? A superior cooling and heating system replete with cutting-edge electronic controls, striking a balance between unparalleled comfort and energy efficiency.
ZSP Series:
Design meets functionality. The slimmed-down profile of the indoor unit, now only 275mm in height, provides versatility, allowing installations above doors and windows. The ingeniously designed multi-stage heat exchanger wraps around the top section of the fan casing. This ensures a muted airflow and noise reduction, all while delivering peak performance and efficiency.
Product Key Feature's:
• High CoP, up to 4.0
• New advanced technology control
• Infra-red controller with wall mounting
bracket
• Reduced height slim construction
• Pipe runs up to 15 metres
• Low noise – 23dBA on smaller models
• Back-up switch for loss of controller
• Cold draft prevention on heat pump
start up
• Fault diagnosis
• Auto re-start after power interruption
• PRE-CHARGED WITH REFRIGERANT for
up to 10 metres pipe length
• Low power requirements 13A fuse.
• Horizontal and vertical vane swoop
Technical Specification:
| Indoor unit |
|
SRK45ZSP-W-R32 |
| Outdoor unit |
|
SRC45ZSP-W-R32 |
| Power source |
|
1 Phase, 220 - 240V, 50Hz |
| Nominal cooling capacity (Min~Max) |
kW |
4.5(0.9~4.8) |
| Nominal heating capacity (Min~Max) |
kW |
5.0(0.8~5.8) |
| Power consumption |
Cooling/Heating |
kW |
1.495 / 1.385 |
| EER/COP |
Cooling/Heating |
|
3.01 / 3.61 |
| Inrush current |
220/230/240 V |
A |
7.0 / 6.7 / 6.4 |
| Max. running current |
|
14 |
| *Sound power level |
Indoor |
Cooling/Heating |
dB(A) |
60 / 64 |
| Outdoor |
Cooling/Heating |
65 / 65 |
| *Sound pressure level |
Indoor |
Cooling (Hi/Me/Lo) |
44/ 39 / 24 |
| Heating (Hi/Me/Lo) |
48 / 41 / 30 |
| Outdoor |
Cooling/Heating |
51/ 51 |
Air flow |
Indoor |
Cooling (Hi/Me/Lo) |
m3/min |
9.0 / 7.2 / 3.8 |
| Heating (Hi/Me/Lo) |
12.0 / 9.2 / 6.2 |
| Outdoor |
Cooling/Heating |
35.5 / 33.5 |
| Exterior dimensions |
Indoor |
HeightxWidthxDepth |
mm |
267 x 783 x 210 |
| Outdoor |
595 x 780(+62) x 290 |
| Net weight |
Indoor / Outdoor |
kg |
7.6 / 40 |
| Ref.piping size |
Liquid/Gas |
ø mm |
6.35(1/4") / 12.7(1/2") |
| Refrigerant line (one way) length |
m |
Max. 25 |
| Vertical height differences |
Outdoor is higher/lower |
m |
Max. 15 / Max. 15 |
| Outdoor operating temperature range |
Cooling |
˚C |
-15~46 |
| Heating |
-15~21 |
| Clean filter |
|
- |
PDF Data:
These air conditioning units must be installed by an F-Gas qualified engineer. We can install the unit for you using our F-Gas Certified Engineers. Please note if you do not select our installation service we will not ship the unit until we have obtained evidence from you that you will have the unit installed by an F-Gas qualified engineer. This is a requirement of the Article 11 (5) EC/517/2014 on fluorinated greenhouse gases and The Fluorinated Greenhouse Gases Regulations 2015.
