MODEL REPLACED BY: Mitsubishi Electric Air Conditioning Heat Pump Inverter MFZ-KT25VG
A Rated energy product
The Mitsubishi Electric Air Conditioning heat pump Inverter MFZ floor mounted consolde unit is extremely versatile and is designed for wall attached installation at floor level. The auto swing vane provides a more natural and comfortable airflow throughout the room and the lightweight, compact design makes installation easy. High C.O.P of 4.07. The Mitsubishi Electric MFZ floor mounted console gives high performance from a compact unit. At only 600mm high, it will fit under most windows making it ideal for residential and light commercial applications. The indoor unit design provides easier cleaning. The unit is a slim-line construction 600x740x200.
Product Key Feature's:
• High CoP
• Advanced technology control
• Infra-red controller with wall mounting bracket
• Super compact construction mm - 700 x 200 x 600
• Pipe runs up to 20 metres
• Low noise – 22dBA on low
• Back-up switch for loss of controller
• Cold draft prevention on heat pump start up
• Fault diagnosis
• Auto re-start after power interruption
• PRE-CHARGED WITH REFRIGERANT for up to 7 metres pipe length
| Capacity (kW): |
|
| Heating (Nominal) (Low - High) |
3.40 (0.90 - 5.10) |
| Cooling (Nominal) (Low - High) |
2.50 (0.90 - 3.40) |
| Heating (UK) (Low - High) |
2.85 (0.75 - 4.25) |
| Cooling (UK) (Low - High) |
2.50 (0.90 - 3.35) |
| SHF R410A (Nominal) |
0.66 |
| COP / EER (Nominal) |
4.07 / 4.31 |
| Energy Label Heating / Cooling |
A / A |
| Width - mm |
700 |
| Depth - mm |
200 |
| Height - mm |
600 |
| Weight - kg |
14 |
| Airflow (m3/min) (Heating / Cooling) - Lo-Mi-Hi-SupHi |
5-6.2-7.6-9.1 / 4.8-5.8-7.1-8.7 |
| Noise (dBA) (Heating / Cooling) - Lo-Mi-Hi-SupHi |
22-27-32-37 / 22-27-32-37 |
| Pipe Size Gas mm (in) |
9.52 (3/8) |
| Pipe Size Liquid mm (in) |
6.35 (1/4) |
| Electrical Supply |
Fed by Outdoor Unit |
| Phase |
Single |
| Fuse Rating (BS88) - HRC (A) |
6 |
| Interconnecting Cable No. Cores |
4 |
| Width - mm |
800 |
| Depth - mm |
285 |
| Height - mm |
550 |
| Weight - kg |
33 |
| Noise (dBA) (Heating / Cooling) |
46 / 46 |
| Electrical Supply |
220-240v, 50Hz |
| Phase |
Single |
| Fuse Rating (BS88) - HRC (A) |
10 |
| System Power Input (kW) - Heating (Nominal) |
0.835 |
| System Power Input (kW) - Cooling (Nominal) |
0.58 |
| System Power Input (kW) - Heating (UK) |
0.76 |
| System Power Input (kW) - Cooling (UK) |
0.46 |
| Starting Current (A) |
3.8 |
| System Running Current (A) - Heating / Cooling |
4 / 2.8 |
| Mains Cable No. Cores |
3 |
| Max Pipe Length (m) |
20 |
| Max Height Difference (m) |
12 |
| Charge (kg) - 7m |
0.9 |
PDF Data:
These air conditioning units must be installed by an F-Gas qualified engineer. We can install the unit for you using our F-Gas Certified Engineers. Please note if you do not select our installation service we will not ship the unit until we have obtained evidence from you that you will have the unit installed by an F-Gas qualified engineer. This is a requirement of the Article 11 (5) EC/517/2014 on fluorinated greenhouse gases and The Fluorinated Greenhouse Gases Regulations 2015.
