Free Delivery on Orders Over £30
Prices Shown Include 20% UK VAT
Call Us On +44(0)1234 841221

EasyFit Multi Wall Mounted Air Conditioning

KMS Air Conditioning Multi 3 x 2.5kW Wall Mounted System KMS3MIO/X1CM Inverter Heat Pump 8.4 kW / 27000 Btu 240V~50Hz

KMS Air Conditioning Multi 3 x 2.5kW Wall Mounted System KMS3MIO/X1CM Inverter Heat Pump 8.4 kW / 27000 Btu 240V~50Hz

£2,112.19 £1,760.16 (ex. VAT)
Stock Status: In Stock

The New KMS range of multi air conditioning systems are highly economical and environmentally friendly, using the latest compressor and inverter technology keeping power consumption minimal, but at the same time providing you with powerful cooling and heating. The KMS3MI0/X1CM is capable of running 3 indoor units of various indoor unit types including wall, cassette and console floor mounted. 

DC Inverter driven compressors and fans. Enhanced inverter performance and system performance are achieved by the addition of a ‘Direct Current’ drive. The variable speed compressor(inverter) enables the system to rapidly reach the desired room temperature setting. Once the desired room temperature has been achieved the compressor rotation speed is reduced, saving up to 30% in energy usage (when compared to the standard fixed speed systems)

Kit Includes:

3 x KFR-23IW/X1c-M-IU Wall Mounted 9000BTU / 2.5Kw
1 x KMS-3MIO/X1c-M 3 Head Multi - Split Outdoor Unit
3 x Controllers for the indoor units
3 x 2 Meter Insulated pipe services 1/4" x 3/8" 

Product Key Feature's:


  • High CoP, up to record 3.90
  • Slim construction 315mm on single fan condensing unit
  • Total pipe runs up to  20 meters
  • Low noise 30dBA on low
  • Cold draft prevention on heat pump start up
  • Fault diagnosis
  • PRE-CHARGED WITH REFRIGERANT for up to 10 meters pipe length
  • 3 indoor units


Indoor Unit KFR-23IW/X1c-M-IU

Exterior dimensions (mm) 780 x 195 x 275
Net weight kg 9
DB rating: 36/32/28
Air flow rate* (cooling) (m3/hr) 400/350/320
Air flow rate* (heating) (m3/hr) 400/350/320
Power Rating: 1 phase 220-240V 50hZ
Cooling Power: 9000 Btu / 2.5kW
Heating Power: 9000 Btu / 2.8kW

Condensing Unit: KMS3MIO/X1CM
Power source 1 ph 240V
Type  Inverter  rotary
COOLING (nominal) max. kW 8.4 / 27000 BTU
HEATING (nominal) max. kW 9.4 / 30000 BTU
UK Cooling (max) kW  9.9 / 33000 BTU
UK Heating (max) kW  11.0 / 37000 BTU
Fuse Rating 16A
E.E.R.  n/a
Energy label in heating  A
Energy label in cooling  A
C.o.P  3.90
ECA - Yes
Exterior dimensions (mm) 900 x 315 x 860
Net weight kg 62
Refrigerant max piping length m 20
Pipe sizes - 3 of 1/4" x  3/8"


PDF Data Sheet:

These air conditioning units must be installed by an F-Gas qualified engineer.  We can install the unit for you using our F-Gas Certified Engineers. Please note if you do not select our installation service  we will not ship the unit until we have obtained evidence from you that you will have the unit installed by an F-Gas qualified engineer. This is a requirement of the Article 11 (5) EC/517/2014 on fluorinated greenhouse gases and The Fluorinated Greenhouse Gases Regulations 2015.​​​​​​​​​​​​​​

Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product