Now wi-fi enabled as standard. Control your air conditioning unit from your smart phone.
The KFR range of floor / ceiling air conditioning inverter heat pump systems are a compact and powerful unit with the latest inverter technology in the outdoor unit. The indoor unit has a L shaped cover that allows condensate to be collected in any position. The indoor units can also be semi-inserted into a false ceiling by as much as 100mm with the bottom side of the unit visible. The auto swing function has horizontal and vertical air sweep combination allowing three-dimensional control of the air direction. The twin slats allow the air outlet direction and the fan function to be chosen with vertical sweeps. Likewise, the double deflector slat system uniformly distributes the airflow avoiding the unpleasant effects that direct airflow can cause. The two parts of this system are connected using insulated copper pipe which is supplied in a standard 4 meter length but can be extended with a optional extension kit. Now includes wi-fi control as standard.
Latest Inverter Technology:
The KFR range of floor / ceiling air conditioning inverter heat pump systems are highly economical and environmentally friendly, using the latest compressor and inverter technology keeping power consumption minimal, but at the same time providing you with powerful cooling and heating. The KFR ceiling / floor units use DC Inverter driven compressors and fans. Enhanced inverter performance and system performance are achieved by the addition of a ‘Direct Current’ compressor drive. The variable speed compressor (inverter) enables the system to rapidly reach the desired room temperature setting. Once the desired room temperature has been achieved the compressor rotation speed is reduced, saving up to 30% in energy usage.
1 x KFR-75LW/X1C Ceiling / Floor Indoor
1 x KFR-75LW Outdoor condensing unit
1 x Controller for the indoor unit
1 x 5 Meter Insulated pipe services 1/4" x 1/2"
Product Key Feature's:
- High CoP, up to 3.15
- Slim construction 315mm on single fan condensing unit
- Pipe runs up to 20 meters
- Low noise 40dBA on low
- Cold draft prevention on heat pump start up
- Fault diagnosis
- PRE-CHARGED WITH REFRIGERANT for up to 10 meters pipe length
- wi-fi controllable
|Power Rating (Ph-V-Hz)
||1, 220-240, 50
|Capacity Max BTU/h (Cooling)
|Capacity Max BTU/h (Heating)
|Power Input (W) Cooling~Heating)
|Current Input (A) Cooling~Heating
|Indoor Noise Level dB (A) (Hi/Mi/Lo)
|Outdoor Noise Level dB (A)
|Indoor Airflow (m3/h) (Hi/Mi/Lo)
|Max. Current Rating (A) Fuse Rating (Type D)
|Net Dimension (mm) Indoor (WxDxH)
|Unit Dimension (mm) Outdoor (WxDxH)
|Net Weight Indoor (Kg)
|Net Weight Outdoor (Kg)
|Max Room Size (m2)
|Max Conservatory Size (m2)
|Connecting Pipe Length (m)
PDF Data Sheet:
These air conditioning units must be installed by an F-Gas qualified engineer. We can install the unit for you using our F-Gas Certified Engineers. Please note if you do not select our installation service we will not ship the unit until we have obtained evidence from you that you will have the unit installed by an F-Gas qualified engineer. This is a requirement of the Article 11 (5) EC/517/2014 on fluorinated greenhouse gases and The Fluorinated Greenhouse Gases Regulations 2015.