Designed for hydroponics and aquatic dosing, pump and water pump control.
This Kit Includes:
1 x Limpet 5A Dosing PCB
2 x Aspen Standard Peristaltic Pumps
1 x Standard Solenoid Water Inlet 15mm
The JetFlow Limpet 5A is a multi-functional output controller that lets the user control dosing quantities to a given liquid, this can be for PH and TD control. The Limpet has two outputs, one for the control of the main liquid flow to be dosed (via solenoid valve or pump) and the other the dosing component. The outputs are mains voltage so the user can control pumps or solenoid valves to allow optimum controlled dosing. The Limpet works on simple principles, there are two inputs for a low and high liquid level input, i.e float switches and a controller timer which controls a dosing component. The user works out the volume of liquid between their two float switches and then works out the required dosing component amounts required for that volume of liquid. The timer is then set to control the flow of the dosing component based on the flow rate of the dosing pump. Multi use applications include aquatics, farming, hydroponics and industry used as a mains-powered monitor or, by adding a solenoid valve or peristaltic pump.
Example of working out dosing levels:
Volume of liquid requiring dosing (DV): 100 Litres
Dosing Pump Litres/Sec (DP): 1.5 ml/sec
Required dosing per Litre in ml (RD): 1
DV / RD = 100 ml (100 Litres/1) = 100 ml
100ml / DP = 66.6 Seconds
Technical Data:
Brand: Jetflow
Switching Amps: 5
Outputs: 2, 1 timed and 1 for level control
Weight (kg): 0.256 Kg
Voltage: 110-220-240V 50/60Hz
Power Consumption: 10W
Dimensions: 138 x 83 x 88mm
Power Cable Length (m): 1.5m approx
PDF Data Sheet: