Unlike regular household dehumidifiers, the DH811 INOX 110V stainless steel desiccant dehumidifier is purposely built for boats and other vessels propelled on water by oars, sails or an engine using 110V. Small, compact and sturdy units are designed to run 24/7 that will extract moisture even down to -4°F (-20°C) room temperature – ideal for many boats, yachts and shipping or where cleanliness is important. The efficient performance of DH811 INOX not only helps protect the boats from the harmful effect of excessive moisture, it also prevents the electronics, furnishing and the very fabric of the hull from rotting inside and outside. Continuous use of the unit stops the bad smells associated with high humidity making the cabin more pleasant to inhabit. Salt-resistant housing is perfect for coastal and ocean environment condition.

• Highly Compact – Perhaps the smallest 8 Litre dehumidifier in the market.
• Dust Filter – The desiccant industrial dehumidifier benefits from a simple reticulated dust filter in metal frame that can be shaken clean or easily replaced to prevent dust particles entering the unit and impeding performance.
• Easy Repair – Maintenance and eventual repair have been thought through with an easy to remove cover that gives easy access to replace cord sets or warn parts by a qualified persons quickly. Prolonging the lifetime of the dehumidifier.
• On Four Feet – Anti scratch plastic feet that are design Patented.Swivel out to provide anchor points for the dehumidifier.
• Carrying Handle – Easy to carry by one person. The handle can be removed if the product is being installed and replaced by a top lid without handle.
• Humidistat Connection – There is both and internal humidistat fitted & the possibility to put on an external humidistat but one can also be added very simply. A jack plug connector is on the on the humidistat EPHUM24DF. This will turn the dehumidifier on an off automatically remotely if the dehumidifier is concealed or ducted in position.
• Duct Air-In & Out – The dehumidifier has all ducts fitted with flanges to allow ducting to be added with 125mm / 5″ hard or flexible ducting.
• Wet Air Exhaust – The has one internal fan. The moisture is vented away allowing it to work in colder temperatures. The moisture is purged from the system by 15% of the process air so will dry with slight negative pressure.
• “Three Hole System” – The system is classed as a “three hole” system due to the one inlet and two outlets.

PDF Data: