Free Delivery on Orders Over £30
Prices Shown Include 20% UK VAT
Call Us On +44(0)1234 841221

Daikin MXS Multi Air Conditioning Inverter Heat Pump A+++

Daikin Air conditioning Multi 1 x 4MXM68A 4 x FTXP20M9 2Kw Wall Mounted Heat Pump R32 A+ 1Ph

Daikin Air conditioning Multi 1 x 4MXM68A 4 x FTXP20M9 2Kw Wall Mounted Heat Pump R32 A+ 1Ph

£3,478.00 £2,898.33 (ex. VAT)
Stock Status: In Stock
Blog

Daikin Air conditioning Multi 1 x 4MXM68A 4 x FTXP20M9 2Kw Wall Mounted Heat Pump R32 A+ 1Ph 240V~50Hz A+ max pipe run 60M




This Kit Includes:



1 x 4MXM68A Inverter Heat Pump Condensing unit 4 port
4 x FTXP20M9 2kw / 6000 Btu Heat pump wall Indoor Unit
4 x Remote controllers ARC480A53





Mitsubishi inverter Multi outdoor running 2 STM50ZG Cassette units.

 


The variable capacity R32 multi systems are ideal for light commercial and residential applications, having the highest SCoP and low start currents, ideal where there is limited power supply. The Inverter outdoor units are suitable for 2 connected indoor units, depending on the model. Each indoor unit is connected directly by a pair of small diameter refrigerant pipes to the outdoor unit.

There are no branch joints involved. All connected indoor units operate in the same mode, i.e. either all Heating, or all Cooling. There are many permutations of connectible indoor units to each outdoor unit. These are listed below. The cooling and heating data is based on all connected units operational at the same time at full load. In practise the load in each room is unlikely to be at 100% continuously, so the available spare capacity is then shared to other units accordingly. Daikin air conditioning has been manufacturing multi systems for residential applications for many years. The latest state-of-the-art Inverter technology is now applied to the range, delivering exceptionally high efficiency, as well as variable individual unit control for stable and comfortable conditions. 

 


 

Product Key Feature's:



•  High sCoP
• 1 Outdoor unit saving space
• Energy saving inverter
• New advanced technology control
• Infra-red controller with wall mounting bracket
• Reduced height slim construction
• Pipe runs up to 30 metres total
• Low noise – 19dBA on smaller models
• Back-up switch for loss of controller
• Cold draft prevention on heat pump start up
• Fault diagnosis
• Auto re-start after power interruption
• PRE-CHARGED WITH REFRIGERANT for up to 20 metres pipe length

 

OUTDOOR UNIT:

 


 

  • Wide choice of connectable indoor units
  • Outdoor units with swing compressor
  • Multi application: combines up to 4 indoor units
  • Bluevolution range: lower environmental impact
  • Seasonal efficiency values up to A+++ in cooling and A++ in heating
  • New design outlook for outdoor unit

Compressor Type Hermetically sealed swing compressor
Dimensions Unit Depth 408 mm
Height 734 mm
Width 974 mm
Operation range Cooling Ambient Min. -10 °CDB
Max. 46 °CDB
Piping connections Additional refrigerant charge 0.02 (for piping length exceeding 30m) kg/m
Level difference IU OU Max. 15 m
IU Max. 7.5 m
Total piping length System Actual 60 m
Power supply Frequency 50 Hz
Phase 1~
Voltage 220-240 V
Refrigerant Charge 2.00 kg
GWP 675
Type R-32
Sound pressure level Cooling Nom. 48 dBA
Heating Nom. 49 dBA
Weight Unit 63 kg


 

INDOOR UNITS:
 

Casing Colour White
Control systems Infrared remote control ARC480A53
Wired remote control BRC944B2 §$ BRC073A1
Dimensions Unit Depth 225 mm
Height 286 mm
Width 770 mm
Fan Air flow rate Cooling High 9.5 m³/min
Medium 7.4 m³/min
Low 5.6 m³/min
Silent operation 4.2 m³/min
Heating High 10.4 m³/min
Medium 8.1 m³/min
Low 6.2 m³/min
Silent operation 5.2 m³/min
Piping connections Drain 18
Gas OD 9.50 mm
Liquid OD 6.35 mm
Power input Cooling Nom. 0.019 kW
Power supply Frequency 50 Hz
Phase 1~
Voltage 220-240 V
Sound power level Cooling 55 dBA
Heating Heating 55 dBA
Sound pressure level Cooling High 39 dBA
Low 25 dBA
Medium 33 dBA
Silent operation 19 dBA
Heating High 39 dBA
Low 28 dBA
Medium 34 dBA
Silent operation 21 dBA
Weight Unit 8.50 kg

PDF Data:


 


These air conditioning units must be installed by an F-Gas qualified engineer.  We can install the unit for you using our F-Gas Certified Engineers. Please note if you do not select our installation service  we will not ship the unit until we have obtained evidence from you that you will have the unit installed by an F-Gas qualified engineer. This is a requirement of the Article 11 (5) EC/517/2014 on fluorinated greenhouse gases and The Fluorinated Greenhouse Gases Regulations 2015.
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product