THIS MODEL HAS NOW BEEN REPLACED BY THE FOLLOWING MODEL:
High Temp Electric Heater Bed Bug FFHT32 With Remote Thermostat 18Kw/60000Btu 415V~50Hz
The FF3T-13 high temperature heater is built to operate at temperatures above +60C. Manufactured and designed in the UK. The FF3T-13 high temp heater has been designed and tested to heat the affected area to a designated temperature of +45C to +50C (up to +60C). Manufactured in the UK from high quality, high temperature components the FF3T-13 comes complete with a remote thermostat option so the user has the option of monitoring temperature from outside the affected area (see image 4). The FF3T-13 heater is defined by its large heat output, whisper quiet operation combined with a unrivalled durability.
This series has been upgraded with a number of unique features:
- 3Kw of heat from a 13a supply
- Temperature and duration pre-set
- 240v / 50Hz
- Suit treatment area size of 15 to 20 SQM in insulated tent
- Suit treatment area size of 10 to 15 SQM in standard insulated room
- Optional remote thermostat within hand controller
- Quality high temperature components
- Optional heat tent available
- UK manufacture
Nominal Heat Output
3 kW / 12000Btu
230v ~50Hz 13a 1ph
Running cost = 2.8 units of electricity per hour
Advise On Use Of Product:
This item is for commercial use and caution must be adhered to when using the product. The heater uses a high temperature element designed to operate at temperatures above +50C, turn off all electrical items in the affected area, never cover the product, never extend the output with ducting beyond its operating range of 3 meters, use the item unobserved or operate in a affected area for longer than 24 Hrs without regular inspection. We cannot except liability for incorrect or unobserved use of the product due its intended commercial use. Please see "Parts And User Manual" for further advice on use and terms.
It is important to select the right amount of heaters for the size of the area being heated to get full output heat from the heater, please see below for further details of coverage. A single heater will effectively works at 40DegC above the ambient temperature of the area.
- 60DegC service heat in 15 to 20 SQM in insulated tent
- 60DegC service heat in 10 to 15 SQM in standard insulated room
Key Factors For Use:
It is important to select the right amount of heaters for the size of the area being heated, (see coverage) if the coverage limits are not met the heater will not operate at the optimum user selected temperature. A temperature probe inside the controller handset can be external of the case for remote readings (see images), otherwise the controller handset is the reference point for the temperature set point as standard. To set a operating temperature simply hold down the set button for 3 seconds, the display will flash the current set point, press the up or down keys to set the required temperature. Once the user temperature has been selected press "set" button and the display will revert back within a few seconds to the operational mode with current ambient temperature displayed.
Parts And User Manual: