Free Delivery on Orders Over £30
Prices Shown Include 20% UK VAT
Call Us On +44(0)1234 841221

Condensate Pumps

Aspen MK4 Peristaltic Pump Operates On Bead Contact With Water 240V~50/60Hz

Aspen MK4 Peristaltic Pump Operates On Bead Contact With Water 240V~50/60Hz

£151.63 £126.35 (ex. VAT)
Stock Status: In Stock

Simply connect MK4 peristaltic pump to a permanent mains supply, fit the sensor to the air conditioner drip tray and connect to the drip tray using the vinyl tube supplied. The MK 4 Pump can be mounted remotely, as it is self-priming to a height of 3 metres (9.8ft), and will pump 6.25 litres (1.65 US gallons) of water per hour against a maximum head of 12 metres (40ft). Unlike other pumps using either mechanical or electrical conductivity sensors, the MK 4 does not suffer from corrosion or contamination problems. When the lower sensor comes into contact with water, the heat conductivity from the sensor provides a temperature difference setting the pump into motion. The pump will only turn off when the water level has reduced below the lower sensor and any moisture on the sensor has evaporated. The mk 4 operates in dirty water.

 Products Key Features:
 

• Operates on bead contact with water   
• Requires only 230V supply   
• Pumps water, fibrous contaminated water and air   
• Self-priming lifts 3 metres (9.8ft)   
• 12 metres (40ft) discharge head   
• No siphoning back   
• No loud sound from dry running   
• Fits into ceiling void or unit   
• Pump has a manual test switch   
• Water flow rate: 6.25 ltrs (1.65 US gallons) per hr @ 12 metres (40ft) head   
• Run on operation approx 5 mins   
• Pump rating: 0.2A, 230V Alternative voltages available
• Maximum water temperature: 40ºC   
• Fire retardant plastics


PDF Data:




Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product