High Power 48V Battery Chargers Home / Garage Equipment / Batteries AGM, Gel Lithium, OPZV and OPZS / Battery Chargers / High Power 48V Battery Chargers / Victron Energy "Skylla-TG" Battery Charger - IP21 - Universal Input (1+1) 48V/50A/230V~50Hz Victron Energy "Skylla-TG" Battery Charger - IP21 - Universal Input (1+1) 48V/50A/230V~50Hz Victron Energy "Skylla-TG" Battery Charger - IP21 - Universal Input (1+1) 48V/50A/230V~50Hz £1,769.73 £1,474.77 (ex. VAT) Stock Status: In Stock Information Reviews One full rated output and one 4 Amp output. Charge voltage can be precisely adjusted to suit any battery system. The input for the charger is 230V at 50/60HZ. Charge voltage can be measured directly on the battery terminals in order to compensate for voltage loss due to cable resistance. An external sensor allows measuring battery temperature and compensating charge voltage accordingly. Key Features Perfect chargers for any type of battery Charge voltage can be precisely adjusted to suit any sealed or unsealed battery system. In particular, sealed maintenance free batteries must be charged correctly in order to ensure a long service life. Overvoltage will result in excessive gassing and venting of a sealed battery. The battery will dry out and fail. Suitable for AC and DC supply (AC-DC and DC-DC operation) Except for the 3-phase input models, the chargers also accept a DC supply. Controlled charging Every TG Charger has a microprocessor, which accurately controls the charging in three steps. The charging process takes place in accordance with the IUoUo characteristic and charges more rapidly than other processes. Use of TG Chargers as a power supply As a result of the perfectly stabilized output voltage, a TG Charger can be used as a power supply if batteries or large buffer capacitors are not available. Two outputs to charge 2 battery banks (24 V models only) The TG Chargers feature 2 isolated outputs. The second output, limited to approximately 4 A and with a slightly lower output voltage, is intended to top up a starter battery. To increase battery life: temperature compensation Every Skylla TG Charger comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed batteries which otherwise might be overcharged and dry out due to venting. Battery voltage sense In order to compensate for voltage loss due to cable resistance, TG Chargers are provided with a voltage sense facility so that the battery always receives the correct charge voltage. Technical Specification Skylla 48/25 TG Input voltage (V AC) 230 Input voltage range (V AC) 185-264 Input voltage range (V DC) 180-400 Frequency (Hz) 45-65 Power factor 1 Charge voltage 'absorption' (V DC) 57 Charge voltage 'float' (V DC) 53 Charge current house batt. (A) (2) 25 Charge current starter batt. (A) n. a. Charge characteristic √ Battery capacity (Ah) 125-250 Temperature sensor √ Can be used as power supply √ Remote alarm Potential free contacts 60 V / 1 A (1x NO and 1x NC) Forced cooling √ Protection (1) a,b,c,d Operating temp. range -40 to +50°C (-40 - 122°F) Humidity (non condensing) max 95% ENCLOSURE Material & Colour aluminium (blue RAL 5012) Battery-connection M8 studs 230 V AC-connection screw-clamp 2,5 mm² (AWG 6) Protection category IP21 Weight kg (lbs) 5,5 (12.1) Not yet reviewed Write an online review and share your thoughts with other shoppers! Be the first to review this product Related Products Victron Energy "Skylla-TG" Battery Charger - IP21 - Universal Input (1+1) 48V/25A/230V~50Hz £995.16 £829.30 (ex. VAT)
