A++ Energy rated product
System Includes:
1 x Toshiba Air Conditioning Multi RAS-3M26S3AV-E Condensing Unit 5.6kW (0.9 - 8.5)
3 x Toshiba Air Conditioning Daiseikai Plasma High-Wall Inverter Split System RAS-B13N3KVP-E (3.5kw / 12000 BTU)
3 x Infra- Red Controllers
3 indoor units on 1 outdoor condensing unit
Toshiba air conditioning has been manufacturing multi systems for residential applications for many years. The latest state-of-the-art Inverter technology is now applied to the multi room range, delivering exceptionally high efficiency, as well as variable individual unit control for stable and comfortable conditions.
The fourth generation of Toshiba Daiseikai air conditioning wall mounted indoor units provides the highest energy savings. Now includes the with Ag + Plasma Purifier air filtration which is effective in particles as small as 0.001 microns in size and perfect for allergen suffers. The filtration is affective on smoke, dust, bacteria and even some viruses. The new modern design integrates perfectly with any interior. With its DC Hybrid Inverter technology and twin rotary compressor this latest Toshiba Air Conditioning Daiseikai unit is extremely energy efficient with the lowest energy consumption of 5.12 EER in cooling.
The Toshiba RAS variable capacity multi systems are ideal for light commercial and residential applications, having the highest CoP up to 4.36, and low start currents, ideal where there is limited power supply. The Inverter outdoor units are suitable for 2, 3, or 4 connected indoor units, depending on the model. Each indoor unit is connected directly by a pair of small diameter refrigerant pipes to the outdoor unit. There are no branch joints involved. All connected indoor units operate in the same mode, i.e. either all Heating, or all Cooling. There are many permutations of connectable indoor units to each outdoor unit. The cooling and heating data is based on all connected units operational at the same time at full load. In practice the load in each room is unlikely to be at 100% continuously, so the available spare capacity is then shared to other units accordingly.
Product Key Feature's:
• High CoP, up to record 4.44
• 1 Outdoor unit saving space
• Energy saving inverter
• New advanced technology control
• Infra-red controller with wall mounting bracket
• Reduced height slim construction
• Pipe runs up to 30 metres
• Low noise – 22dBA on smaller models
• Back-up switch for loss of controller
• Cold draft prevention on heat pump start up
• Fault diagnosis
• Auto re-start after power interruption
• PRE-CHARGED WITH REFRIGERANT for
up to 30 metres pipe length
Indoor Wall Mounted Units:
Model - RAS-B13N3KVP-E
Exterior dimensions (mm) 275 x 790 x 225
Net weight kg 10
Sound Pressure Level* (cooling) dB(A) 40-26
Sound Pressure Level* (heating) dB(A) 55-41
COOLING (nominal) max. kW 3.70
HEATING (nominal) max. kW 5.0
OUTDOOR UNIT:
| PRODUCT CODE |
RAS-3M26S3AV-E |
| OPERATION DATA |
|
| COOLING CAPACITY |
7.5kW |
| HEATING CAPACITY |
9kW |
| EER/COP RATED |
|
| COOL |
3.5 |
| HEAT |
4.67 |
| CHARGELESS LENGTH |
25m |
| MAXIMUM PIPE LENGTH |
75m |
| MAXIMUM HEIGHT DIFFERENCE |
25m |
| OPERATING RANGE |
|
| COOL |
5 ~ 43 |
| HEAT |
-10 ~ 24 |
| WEIGHT |
72Kg |
| DIMENSIONS (H x W x D) |
890 x 800 x 320mm |
PDF Data:
These air conditioning units must be installed by an F-Gas qualified engineer. We can install the unit for you using our F-Gas Certified Engineers. Please note if you do not select our installation service we will not ship the unit until we have obtained evidence from you that you will have the unit installed by an F-Gas qualified engineer. This is a requirement of the Article 11 (5) EC/517/2014 on fluorinated greenhouse gases and The Fluorinated Greenhouse Gases Regulations 2015.
