SE4400A Microphone Including Suspension Mount

SE4400A Microphone Including Suspension Mount 

Designed by a team of extremely experienced engineers and verified by extensive listening tests, each SE4400A Microphone utilises gold sputtered, ultra-light mylar diaphragms in an advanced capsule design. The SE4400A Microphone is constructed using the finest quality Japanese electronic components and extensively tested to provide you with years of trouble-free operation. Every SE4400A Microphone comes with an individual frequency response plot. The SE4400A tube microphone use traditional, high voltage tube circuitry to ensure the true vintage tube sound. This is in contrast to many cost saving tube designs where the tube is run at a very low operating voltage so as to introduce deliberate distortion which their designers hope to pass off as warmth. Whereas most vintage mic tubes are hard to find and extremely expensive, The SE4400A Microphone uses commonly available high performance tubes that are specially selected and matched for low noise operation. 

There are two basic microphone directional patterns, omni-directional, which picks up sound equally from all directions, and figure-of-eight, which picks up from both the front and rear of the microphone but not from the sides. Combining these two basic patterns creates a cardioid or directional response, which simply means the SE4400A Microphone is most sensitive in one particular direction. By varying the way in which the omni-directional and figure-of-eight patterns are combined, varying widths of cardioid pattern can be created.

Key Product Features: 

• Transformer-balanced microphone
• Supplied with with metal shock mount cradle and aluminum flight case
• High SPL capability at 130dB
• Specifications:
• Frequency Response: 20Hz-20KHz
• Sensitivity: 14.1mV/Pa -37 +/- 1.5dB
• Polar Pattern: Cardioid
• Impedance: < 200 Ohms
• Equivalent Noise Level: 17dB(A weighted)
• Max SPL for 0.5% THD@1000Hz: 125dB
• Power Requirement: Phantom power 48V +/- 4V
• Connector: 3-pin XLR

Includes: 

• SE-4400A Microphone
• Supplied with with metal shock mount cradle and aluminum flight case
• Includes Suspension Mount