Mitsubishi Heavy Industrial SCM45-ZG Multi Inverter 2 x 3.5 kW room system

Our Price: £1,450.00

Mitsubishi Heavy Industrial SCM45-ZG Multi Inverter 2 x 3.5 kW room system

Click to enlarge

Inverter Multi outdoor running 2 SKM35ZG (2.5Kw 9250 Btu) wall units

Includes
1 x SCM45ZG-S Condensing unit
2 x SKM35ZG Indoor units
2 x Controllers

2 indoor units on 1 outdoor condensing unit

Mitsubishi Heavy Industries has been manufacturing multi systems for residential applications for many years. The latest state-of-the-art Inverter technology is now applied to the SKM range, delivering exceptionally high efficiency, as well as variable individual unit control for stable and comfortable conditions.

The new advanced SKM Wall Mounted Indoor Units now include the Mitsubishi innovative NATURAL ENZYME FILTER which destroys funghi bacteria and viruses. This combined with the main PHOTOCATALYTIC WASHABLE DEODORIZING FILTER, provides healthy clean air for the occupants. Record CoP (Coefficient of Performance) This has been dramatically increased, up to a record 4.02 on some models. This means the system can deliver 4.02kW of heating, whilst consuming only 1.0kW of electrical power. This has been achieved by combining advanced Mitsubishi technology with R410A.

The SKM variable capacity multi systems are ideal for light commercial and residential applications, having the highest CoP up to 4.02, and low start currents, ideal where there is limited power supply. The Inverter outdoor units are suitable for 2, 3, or 4 connected indoor units, depending on the model. Each indoor unit is connected directly by a pair of small diameter refrigerant pipes to the outdoor unit. There are no branch joints involved. All connected indoor units operate in the same mode, i.e. either all Heating, or all Cooling.

There are many permutations of connectable indoor units to each outdoor unit. These are listed below. The cooling and heating data is based on all connected units operational at the same time at full load. In practice the load in each room is unlikely to be at 100% continuously, so the available spare capacity is then shared to other units accordingly.

Product Key Feature's

• High CoP, up to record 3.62
• 1 Outdoor unit saving space
• Energy saving inverter
• New advanced technology control
• Infra-red controller with wall mounting bracket
• Reduced height slim construction
• Pipe runs up to 30 metres
• Low noise – 22dBA on smaller models
• Back-up switch for loss of controller
• Cold draft prevention on heat pump start up
• Fault diagnosis
• Auto re-start after power interruption
• PRE-CHARGED WITH REFRIGERANT for
up to 30 metres pipe length

Indoor Wall Mounted Units

Model - SKM35ZG
Exterior dimensions (mm) 250 x 815 x 249
Net weight kg 9
Sound Pressure Level* (cooling) dB(A) 37/30/22
Sound Pressure Level* (heating) dB(A) 39/33/26
COOLING (nominal) max. kW 3.50
HEATING (nominal) max. kW 4.50

OUTDOOR UNIT

Model - SCM45ZG
Power source 1 ph 240v
Type Inverter
COOLING (nominal) max. kW 4.5(0.7~5.6)
HEATING (nominal) max. kW 5.6(0.7~6.8)
E.E.R. 3.21
Energy label in heating A
Energy label in cooling A
C.o.P 3.64
Exterior dimensions (mm) 640X850X290
Net weight kg 45
Power Source Rating MCB A 20A
Refrigerant max piping length m 30
2 pipe service connections
Pipe sizes - 1/4" x 3/8"