|
Mitsubishi Heavy Industrial SRK25ZG-S Wall Mounted Installation Kit
2.5kW / 9000 Btu Heat pump Inverter Split Type Wall mounted Air conditioning System.
Installation pack includes the following tools and materials
Includes
1 x Mitsubishi SRK25-ZG Complete system
2 x Pipe bender to suit pipes
15 Meters of 1/4" & 3/8" Pipes
16 Meters of cable for interconnecting cable
16 Meters of installation for pipes
1 x Wall bracket for condensing unit
1 x Flaring tool & Pipe working tool
MITSUBISHI HEAVY INDUSTRIES has made a giant leap forward in air conditioning
and heat pump technology, with the latest introduction of high performance ZG Wall Mounted
air conditioning systems.
The NEW ADVANCED SRK Wall Mounted Indoor Units have a new ‘smooth line’
design of fascia, which has a lower profile flatter appearance, and is far more easy
to keep clean. The SRK now includes the Mitsubishi innovative NATURAL ENZYME
FILTER which destroys funghi, bacteria and viruses. This, combined with the
main Photocatalytic Washable Deodorizing Filter, provides healthy clean air
for the occupants.
MITSUBISHI has used its innovative technology of compressor design, and
the ozone friendly R410A refrigerant, and combined this with their new
“jet-flow” low noise air movement fan arrangement. The result is a quiet,
high performance cooling and heating system, with advanced electronic
controls for maximum comfort, controllable and energy efficient.
ZG Series
The new slim profile indoor unit has a reduced height of 268mm, allowing installation above
door openings and windows. The new multiple stage heat exchanger is folded to form a
surround to the upper section of the fan enclosure. This ensures low air velocity, and
reduced sound levels, whilst delivering high performance and efficiency.
Product Key Feature's
• High CoP, up to record 3.62
• New advanced technology control
• Infra-red controller with wall mounting
bracket
• Reduced height slim construction
• Pipe runs up to 15 metres
• Low noise – 22dBA on smaller models
• Back-up switch for loss of controller
• Cold draft prevention on heat pump
start up
• Fault diagnosis
• Auto re-start after power interruption
• PRE-CHARGED WITH REFRIGERANT for
up to 15 metres pipe length
• Low power requirements 10A fuse
• Horizontal and vertical vane swoop
SRK Wall Mounted SRK25ZG
Power source 1 ph 240V
Type Inverter
COOLING (nominal) max. kW 2.50
HEATING (nominal) max. kW 3.40
UK Cooling (max) kW 2.91
UK Sensible Cooling kW 1.81 2.30 3.23
E.E.R. 3.21
Energy label in heating A
Energy label in cooling A
C.o.P 3.66
INDOOR UNIT
Exterior dimensions (mm) 790x199x268
Net weight kg 9
Sound Pressure Level* (cooling) dB(A) 37/30/22
Sound Pressure Level* (heating) dB(A) 39/33/26
OUTDOOR UNIT
Exterior dimensions (mm) 540 x 720 x 290
Net weight kg 35
Power Source Rating MCB A 15A
Refrigerant max piping length m 15
Pipe sizes - 1/4" x 3/8"
|
