Large capacity and powerful airflow over a large heat exchanger, long cross-flow fan, high output DC fan motor and a new airflow structure design.  

The ASYG wall mounted Fujitsu air conditioner is a people-friendly, function packed, environment-friendly range of heating and cooling systems. The Fujitsu ASYG wall mounted units offer a broad range of functions designed for large living spaces, offices, bedrooms and children’s rooms. Fujitsu air conditioners make the room being air conditioned more comfortable with automatic operation functions, air cleaning filters and easy control functions. All Fujitsu air conditioner models feature heat pump inverter technology which are highly efficient in operation and conserve electricity usage.

The Fujitsu air conditioning ASYG-LMTA has a attractive new flat front panel design on the indoor units which provides easier cleaning as the air return remains hidden at the top and the front fascia has no air inlet. The unit is a slim-line construction only 203mm deep and has a high density heat exchanger which optimises and enhances the flow/K calories ratio to the air and produces very little noise (31dB@1meter). Because of this design the turbine fan is able to work at a lower speed and minimises noise. The fully functional modern IR type remote control comes as standard with a optional wi-fi available soon.

The Fujitsu air conditioning ASYG-LMTA outdoor unit is made from lightweight material, are smaller and weigh less whilst the  rigid construction, quality  and control system increasing their resistance and optimised power rating in any outside weather conditions. Among the many qualities of outdoor unit's body design is the noise reduction as a result of the material absorption of vibrations, noise and the incorporation of protection of the connection valves so all condensate can be dispersed into a single drain out point.

 The ASYG-LMTA model has a server room function with inter-lock operation by connecting 2 indoor units with a cable. Cooling operation can be performed even in low outdoor temperatures and low humidity environments.  The Alternative operation where two units operate alternately, When 1 unit breaks down, the other unit starts operating automatically. Both units operate simultaneously when the loaded capacity is not enough with one unit. 

The human sensor function catches movements of people in a room and operates with lower capacity when people leave the room. When people come back to the room, it automatically returns to previous operating mode.
 

Product Key Feature's:

• High CoP, up to record 3.65
• Infra-red controller    
• Slim construction 340mm
• Pipe runs up to 50 metres
• Low noise – 31dBA on low
• Back-up switch for loss of controller
• Cold draft prevention on heat pump start up
• Fault diagnosis
• Auto re-start after power interruption
• PRE-CHARGED WITH REFRIGERANT for up to 20 metres pipe length
• Low ambient tested to -15 Deg/C in heating.
• Light weight noise absorbing outdoor unit.

 

PDF Data Sheet:



These air conditioning units must be installed by an F-Gas qualified engineer.  We can install the unit for you using our F-Gas Certified Engineers. Please note if you do not select our installation service  we will not ship the unit until we have obtained evidence from you that you will have the unit installed by an F-Gas qualified engineer. This is a requirement of the Article 11 (5) EC/517/2014 on fluorinated greenhouse gases and The Fluorinated Greenhouse Gases Regulations 2015.