For Restricted space suspended ceilings in office and retail applications. A+ rated energy product.
Daikin air conditioning's unique 360° Roundflow FCAG cassette range has a ultra slim casing structure and is designed for restricted space suspended ceilings in residential, office and retail applications. The 360° operation ensures even distribution of temperatures and airflow with no dead spots in the room. The vertical auto swing system automatically cycles the outflow louvers up and down, distributing the air and temperature evenly throughout the room. An optional presence sensor saves you up to 27% more in energy use and allows the system to dynamically respond to room occupancy. If the room is empty, air conditioning can be automatically switched off. When the room is occupied, air flow is directed away from occupants for draught-free comfort.
Daikin air conditioning's Round-flow cassette air conditioners are of a low profile design (204mm) for easy installation into and plastered ceiling. Daikin's cassette range lead the industry with their energy savings, low sound levels and wide model range. The Round-flow indoor units are extremely quiet in operation, the sound levels are as low as 28 dB. The filter is able to trap microscopic particles, to decompose odours, and even to remove bacteria and to deactivate viruses. The filter lasts for 3 years without replacement if washed about around 6 months.
The Round-flow cassette and RXS condenser can be used as a cost effective way to replace old equipment as they are able to use existing R22 and R407C pipe-work. FCAG / RXS pairs are listed on the Energy Technology List (ETL) – the definitive list of products that qualify for Enhanced Capital Allowance (ECA). A Presence sensor control's the temperature set point based on occupancy and can reduce running costs by up to 27% over a 3 hour period. The remote controller gives access to a range of energy saving settings, allowing control over set-point ranges, fan speed and other day-to-day use of controls. The controller also gives a kWh indication of the power consumed by the cassette and outdoor unit so you can monitor your energy usage.
Product Key Feature's:
• High SCoP, up to record 4.10
• High Air movement volume
• Fixed wall mounted controller
• Slim construction
• Pipe runs up to 50 meters
• Low noise levels
• Back-up switch for loss of controller
• Cold draft prevention on heat pump start up
• Fault diagnosis
• Auto re-start after power interruption
• PRE-CHARGED WITH REFRIGERANT for
up to 30 metres pipe length
Indoor unit |
3 Phase |
FCAG125A |
Cooling Capacity |
Nominal kW |
12 |
UK Total kW |
13.6 |
UK Sensible kW |
9.3 |
Heating Capacity Nominal kW |
13.5 |
Seasonal efficiency (according to EN14825) |
Cooling |
Energy label |
A |
Pdesign kW |
12.0 |
SEER |
5.30 |
Annual energy kWh consumption |
792 |
Heating (Average climate) |
Energy label |
A+ |
Pdesign kW |
8.03 |
SCOP |
4.01 |
Annual energy kWh consumption |
2,803 |
Nominal efficiency (cooling at 35°/27° nominal load, heating at 7°/20° nominal load) |
EER |
3.21 |
COP |
3.41 |
Annual energy consumption kWh |
1,870 |
Energy label Cooling/Heating |
A/B |
Nominal Power Input Cooling / Heating kW |
2.88 / 3.05 3.74 / 3.96 |
Dimensions Height x Width x Depth mm (with deco-panel) |
246 (306) x 840 (950) x 840 (950) |
Weight (with deco-panel) kg |
24 (29.4) |
Air Flow Rate High / Low m3/min |
26 / 12.4 |
Sound Power High dBA |
58 |
Sound Pressure High / Low dBA |
41 / 29 |
Refrigerant Type |
R32 |
Power Supply |
From outdoor unit |
Controller |
BRC1E52A wired |
Outdoor unit |
RZQSG125L8Y1 |
Dimensions Height x Width x Depth mm |
990 x 940 x 320 |
Weight kg |
82 |
Operation Range |
Cooling Min~Max °CDB |
-15°C to +46°C |
Heating Min~Max °CWB |
-15°C to +15.5°C |
Sound Power High dBA |
70 |
Sound Pressure Nominal dBA |
54 |
Refrigerant Type |
R32 |
Power Supply |
3~ / 50Hz / 400v |
Piping connections Liquid (OD)/Gas inches |
3/8 / 5/8 |
Piping Length (Maximum) m |
50 |
Max Installation Height Difference m |
30 |
Accessories:
Self cleaning deco-panel (BYCQ140DG)
White louvred deco-panel (BYCQ140DW)
Presence sensor (BRYQ140A)
Fresh air intake kit (KDDQ55B140)
PDF Data:
These air conditioning units must be installed by an F-Gas qualified engineer. We can install the unit for you using our F-Gas Certified Engineers. Please note if you do not select our installation service we will not ship the unit until we have obtained evidence from you that you will have the unit installed by an F-Gas qualified engineer. This is a requirement of the Article 11 (5) EC/517/2014 on fluorinated greenhouse gases and The Fluorinated Greenhouse Gases Regulations 2015.